A water metering assembly is intended to account for water in a cold and hot water system at pressures up to 1.6 MPa (16 kgf/cm2) and temperature range from 5 to 110°C.
Water metering assemblies are designed in accordance with the norms established by SNiP 2.04.01, ensuring compliance with all requirements for installation and proper operation of the meter.
When released from production, all products are subject to 100% final inspection and assigned an individual serial number.
| General technical requirements |
Warranty service life - in accordance with the requirements of the data sheet for components. |
| Storage and transportation |
Storage conditions of water metering assemblies - 3 according to GOST 15150: Closed or other rooms with natural ventilation without artificially controlled climatic conditions, where fluctuations in temperature and humidity are considerably less than in the open air (stone, concrete, metal with thermal insulation and other storages) in any macroclimatic areas, including in areas with a tropical climate. Transportation conditions of water metering assemblies - 5 according to GOST 15150: Sheds or rooms where temperature and humidity fluctuations do not significantly differ from those in the open air (tents, metal storages without thermal insulation) located in macroclimatic regions with a temperate and cold climate in any type of atmosphere. Water metering assemblies can be transported by any means of transport in accordance with the shipping rules of goods, relevant for the selected transport |
